USB TO TTL CONVERTER UART MODULE CH340G CH340
Spesifikasi:
USB to Serial TTL / UART
6 PIN : 5V, VCC, 3V3, TXD, RXD, GND
IC cconverter : CH340 / CH340G
Silahkan download driver di
http://www.wch.cn/download/CH341SER_ZIP.html
Rp13.000 Rp15.000
Produk Terkait
- Programmer Modul
NANO V3 ATMEGA168 CH340 COMPATIBLE FOR ARDUINO NANO V3.0
0 out of 5(0)It has similar structure with Arduino Diecimila/Duemilanove, but different size. To reduce the size, components are mounted on both sides of the PCB.
The board uses a chip CH340G as converter UART-USB. Chip CH340G – is a budget solution. With an operation frequency in 12Mhz, yields stable result of a data interchange (for correct installation of drivers on the computer follow the instruction). Nano V3, can be powered via microUSB-port (up to 500mA). External power supply 6-12V unregulated to output VIN, or 5V external power source to a regulate output of 5V. The power supply is automatically selected with the maximum voltage value.
* This Nano ATmega168 have PinOut for V3, not V2.Technical details:
Nano V3 form-factor,
ATmega168 (16Mhz) microcontroller,
CH340G – USB-UART interface,
Input voltage 6-12V,
Output voltage 5V/800mA, 3.3V/180mA (Only in NEW vesrion),
MicroUSB – connection socket,
500mA resetable Fuse on USB portSKU: ARD04Rp83.000Rp95.000 - Relay & Driver Motor
Motor Driver L298N Board Modul Arduino
0 out of 5(0)Detail Produk:
++ Double H bridge drive
++ Chip: L298N (ST NEW)
++ Logical voltage: 5V
++ Drive voltage: 5V-35V
++ Logical current: 0mA-36mA
++ Drive current: 2A(MAX single bridge)
++ Max power: 25W
++ Size:43 x 43 x 26mm
++ Net weight: 26g
++ Package weight:36gSKU: MOT03Rp22.000Rp35.000 - Programmer Modul
UNO R3 ATMEGA328P-PU 16U2 DIP COMPATIBLE WITH ARDUINO BOARD PLUS KABEL USB.
0 out of 5(0)Technical specs:
– Microcontroller : ATmega328P
– Operating Voltage : 5V
– Input Voltage (recommended) : 7-12V
– Input Voltage (limit) : 6-20V
– Digital I/O Pins : 14 (of which 6 provide PWM output)
– PWM Digital I/O Pins : 6
– Analog Input Pins : 6
– DC Current per I/O Pin : 20 mA
– DC Current for 3.3V Pin 50 mA
– Flash Memory : 32 KB (ATmega328P) of which 0.5 KB used by bootloader
– SRAM : 2 KB (ATmega328P)
– EEPROM : 1KB (ATmega328P)
– Clock Speed : 16 MHz
– Length : 68.6 mm
– Width : 53.4 mmSKU: ARD01Rp160.000Rp175.000