Tidak ada produk di keranjang.
-30%
Programmer Modul
TACTILE PUSH BUTTON MICRO SWITCH MOMENTARY TACT 6X6X7MM 4 LEGS
Spesifikasi:
TACT Switch Series main technical indicators
Temperature Range: -25 ~ +85 C
Rated Load: DC12V 0.1A
Contact Resistance: <= 0.03 ohm
Withstand Voltage: 250 VAC (50Hz) / MIN
Action Force Actuation Force: 1.3 +/- 0.5 N
Insulation Resistance: >= 100 M.ohm
Life Life: 100.000x
Rp3.500 Rp5.000
Harga per 10 pcs
Saklar kecil On/Off TACTILE PUSH BUTTON MICRO SWITCH yang sering dipakai untuk merakit rangkaian elektronik dan bisa juga dipakai untuk menggantikan part lama yang sudah rusak pada alat-alat elektronik seperti senter, TV dll
Spesifikasi:
TACT Switch Series main technical indicators
Temperature Range: -25 ~ +85 C
Rated Load: DC12V 0.1A
Contact Resistance: <= 0.03 ohm
Withstand Voltage: 250 VAC (50Hz) / MIN
Action Force Actuation Force: 1.3 +/- 0.5 N
Insulation Resistance: >= 100 M.ohm
Life Life: 100.000x
#pushbutton #arduino #switch #button
| Berat | 20 gram |
|---|
Produk Terkait
- Programmer Modul
NANO V3 ATMEGA168 CH340 COMPATIBLE FOR ARDUINO NANO V3.0
It has similar structure with Arduino Diecimila/Duemilanove, but different size. To reduce the size, components are mounted on both sides of the PCB.
The board uses a chip CH340G as converter UART-USB. Chip CH340G – is a budget solution. With an operation frequency in 12Mhz, yields stable result of a data interchange (for correct installation of drivers on the computer follow the instruction). Nano V3, can be powered via microUSB-port (up to 500mA). External power supply 6-12V unregulated to output VIN, or 5V external power source to a regulate output of 5V. The power supply is automatically selected with the maximum voltage value.
* This Nano ATmega168 have PinOut for V3, not V2.Technical details:
Nano V3 form-factor,
ATmega168 (16Mhz) microcontroller,
CH340G – USB-UART interface,
Input voltage 6-12V,
Output voltage 5V/800mA, 3.3V/180mA (Only in NEW vesrion),
MicroUSB – connection socket,
500mA resetable Fuse on USB portSKU: ARD04 - IOT & ESP8266
NODEMCU ESP8266 CP2102 WIFI IOT LUA
Secara umum :
– Based ESP8266 Serial WiFi SoC dengan onboard USB to TTL menggunakan IC CP2102 (USB to UART Bridge Virtual COM Port)
– Bisa diprogram langsung lewat USB.
– Development Board dengan Open-Source Firmware ini dapat dipergunakan untuk mendevelop aplikasi IoT hanya dengan beberapa baris Lua script.
– Wireless standard : IEEE 802.11b/g/n
– 6 x Digital I/O, 3 x PWM Channels, 1 x ADC Channel
– Full I/O control through WiFi network
– GPIO with 15mA current drive capability
– Supports Smart Link intelligent networking
– Built in 32-bit MCU
– built-in TCP/IP protocol stack, and support multiple TCP Client connection
– UART/GPIO data communication interfaceSKU: n/a
