Tidak ada produk di keranjang.
-20%
Programmer Modul
RTC DS1307 RTC REAL TIME CLOCK UNTUK ARDUINO
Accurate calendar up to year 2100
DS1307 based RTC
1Hz output pin
56 Bytes of Non-volatile memory available to user
Size: 28x27x8.4mm
1 Buah Isinya ::
– DS1307 Module x 1
– Baterai
Rp24.000 Rp30.000
Two wire I2C interface
Hour : Minutes : Seconds AM/PM
Day Month, Date – Year
Leap year compensation
Accurate calendar up to year 2100
DS1307 based RTC
1Hz output pin
56 Bytes of Non-volatile memory available to user
Size: 28x27x8.4mm
1 Buah Isinya ::
– DS1307 Module x 1
– Baterai
#ds1307 #rtc #arduino #bateraio
| Berat | 3 gram |
|---|
Produk Terkait
- Programmer Modul
4 CHANNEL LOGIC LEVEL I2C CONVERTER 3.3V TO 5V BI-DIRECTIONAL MODULE
spesifikasi :
http://www.banggood.com/Logic-Level-Converter-Bi-Directional-IIC-4-Way-Level-Conversion-Module-p-938774.htmlIsi Paket (lihat Gambar 1)
1 x 4 Channel I2C Logic Level Converter Bi-Directional Module 5v to 3.3v
2 pcs pin header maleSKU: ARD16 - IOT & ESP8266
NODEMCU ESP8266 CP2102 WIFI IOT LUA
Secara umum :
– Based ESP8266 Serial WiFi SoC dengan onboard USB to TTL menggunakan IC CP2102 (USB to UART Bridge Virtual COM Port)
– Bisa diprogram langsung lewat USB.
– Development Board dengan Open-Source Firmware ini dapat dipergunakan untuk mendevelop aplikasi IoT hanya dengan beberapa baris Lua script.
– Wireless standard : IEEE 802.11b/g/n
– 6 x Digital I/O, 3 x PWM Channels, 1 x ADC Channel
– Full I/O control through WiFi network
– GPIO with 15mA current drive capability
– Supports Smart Link intelligent networking
– Built in 32-bit MCU
– built-in TCP/IP protocol stack, and support multiple TCP Client connection
– UART/GPIO data communication interfaceSKU: n/a - Programmer Modul
UNO R3 SMD CH340 ATMEGA328P PLUS KABEL USB DAN PIN HEADER
Spesifikasi :
– Microcontroller : ATmega328 SMD
– Operating Voltage : 5V
– Input Voltage (recommended) : 7-12V
– Digital I/O Pins : 14 (of which 6 provide PWM output)
– Analog Input Pins : 6
– Flash Memory : 32 KB (ATmega328) of which 0.5 KB used by bootloader
– SRAM : 2 KB (ATmega328)
– EEPROM : 1 KB (ATmega328)
– Clock Speed : 16 MHzSKU: ARD02
