Tidak ada produk di keranjang.
-37%
Relay & Driver Motor
Motor Driver L298N Board Modul Arduino
Detail Produk:
++ Double H bridge drive
++ Chip: L298N (ST NEW)
++ Logical voltage: 5V
++ Drive voltage: 5V-35V
++ Logical current: 0mA-36mA
++ Drive current: 2A(MAX single bridge)
++ Max power: 25W
++ Size:43 x 43 x 26mm
++ Net weight: 26g
++ Package weight:36g
Rp22.000 Rp35.000
L298N Dual H Bridge DC Stepper Motor Drive Controller Board dengan L298N sebagai chip utama memiliki performance yang tinggi. Mendukung hingga 46v, arus mencapai 3A Max dan power hingga 25w. Dapat digunakan untuk menjalankan 1x 2-phase stepper motor, 1x 4-phase stepper motor, atau 2 DC motor.
Detail Produk:
++ Double H bridge drive
++ Chip: L298N (ST NEW)
++ Logical voltage: 5V
++ Drive voltage: 5V-35V
++ Logical current: 0mA-36mA
++ Drive current: 2A(MAX single bridge)
++ Max power: 25W
++ Size:43 x 43 x 26mm
++ Net weight: 26g
++ Package weight:36g
Isi Paket:
1x L298N Dual H Bridge DC Stepper Motor Drive Controller Board
#l298n #arduino #motorstepper #motordriver
| Berat | 30 gram |
|---|
Produk Terkait
- Programmer Modul
NANO V3 ATMEGA168 CH340 COMPATIBLE FOR ARDUINO NANO V3.0
It has similar structure with Arduino Diecimila/Duemilanove, but different size. To reduce the size, components are mounted on both sides of the PCB.
The board uses a chip CH340G as converter UART-USB. Chip CH340G – is a budget solution. With an operation frequency in 12Mhz, yields stable result of a data interchange (for correct installation of drivers on the computer follow the instruction). Nano V3, can be powered via microUSB-port (up to 500mA). External power supply 6-12V unregulated to output VIN, or 5V external power source to a regulate output of 5V. The power supply is automatically selected with the maximum voltage value.
* This Nano ATmega168 have PinOut for V3, not V2.Technical details:
Nano V3 form-factor,
ATmega168 (16Mhz) microcontroller,
CH340G – USB-UART interface,
Input voltage 6-12V,
Output voltage 5V/800mA, 3.3V/180mA (Only in NEW vesrion),
MicroUSB – connection socket,
500mA resetable Fuse on USB portSKU: ARD04 - Programmer Modul
Nano v3 atmega328-pu 5V Compatible with Arduino Board
Spesifikasi:
– Size 43mm x 18mm
– Fully Compatible for Arduino for Nano V3.0 ATmega328P-AU
– ATmega328P-AU Microcontroller
– Operating Voltage 5V
– Input Voltage (recommended) 7V-12V
– Digital I/O Pins 14 (of which 6 provide PWM output)
– Analog Input Pins 8
– Flash Memory 32 KB (ATmega328) of which 2 KB used by bootloader
– Frekuensi clock 16 MHzSKU: ARD54 - Sensor & Transducer
HC-SR501 PIR MOTION SENSOR MODULE
Description:
100% brand new T6 LED Adjustable Focus Torch
Qty: 1pcs
Product Type: HC–SR501 Body Sensor Module
Operating voltage range: DC 5-20V
Quiescent Current: 50uA
Level output: High 3.3 V /Low 0V
Trigger: L can not be repeated trigger/H can be repeated trigger (Default repeated trigger)
Delay time: 5-200S(adjustable) the range is (0.xx second to tens of second)
Block time: 2.5S(default)Can be made a range(0.xx to tens of seconds
Board Dimensions: 32mm*24mm
Angle Sensor: 100 cone angle
Operation Temp: -15-+70 degrees
Lens size sensor: Diameter:23mm(Default)
Weight: Approx 10g
Easy and Convenient to useSKU: SNSR05 - LDC & Display
LCD 1602 5V 16 X 2 DISPLAY MODULE GREEN BACKLIGHT ARDUINO
Spesifikasi:
– Tampilan 2 baris @ 16 karakter, 5 x 8 pixel / karakter
– Display controller: HD44780 (standar industri LCD)
– Dilengkapi lampu latar warna hijau (green backlight)
– Tulisan putih
– Sudut pandang lebar dengan tingkat kontras yang dapat diatur dan terlihat jelas
– Tegangan kerja: 5V DC
– Dimensi modul: 80 x 36 x 12 mm
– Dimensi layar tampilan: 64,5 mm x 16 mmSKU: DISP07
