KABEL JUMPER DUPONT 40CM 10 BUAH MALE-FEMALE
Panjang kabel = 40 cm
Jenis kabel :
M-F = Male to Female
Harga diatas per 10 helai kabel
Pakage = 10 x kabel jumper
Rp9.500 Rp10.500
Produk Terkait
- Sensor & Transducer
HC-SR501 PIR MOTION SENSOR MODULE
0 out of 5(0)Description:
100% brand new T6 LED Adjustable Focus Torch
Qty: 1pcs
Product Type: HC–SR501 Body Sensor Module
Operating voltage range: DC 5-20V
Quiescent Current: 50uA
Level output: High 3.3 V /Low 0V
Trigger: L can not be repeated trigger/H can be repeated trigger (Default repeated trigger)
Delay time: 5-200S(adjustable) the range is (0.xx second to tens of second)
Block time: 2.5S(default)Can be made a range(0.xx to tens of seconds
Board Dimensions: 32mm*24mm
Angle Sensor: 100 cone angle
Operation Temp: -15-+70 degrees
Lens size sensor: Diameter:23mm(Default)
Weight: Approx 10g
Easy and Convenient to useSKU: SNSR05Rp19.000Rp29.900 - Relay & Driver Motor
Motor Driver L298N Board Modul Arduino
0 out of 5(0)Detail Produk:
++ Double H bridge drive
++ Chip: L298N (ST NEW)
++ Logical voltage: 5V
++ Drive voltage: 5V-35V
++ Logical current: 0mA-36mA
++ Drive current: 2A(MAX single bridge)
++ Max power: 25W
++ Size:43 x 43 x 26mm
++ Net weight: 26g
++ Package weight:36gSKU: MOT03Rp22.000Rp35.000 - Programmer Modul
UNO R3 ATMEGA328P-PU 16U2 DIP COMPATIBLE WITH ARDUINO BOARD PLUS KABEL USB.
0 out of 5(0)Technical specs:
– Microcontroller : ATmega328P
– Operating Voltage : 5V
– Input Voltage (recommended) : 7-12V
– Input Voltage (limit) : 6-20V
– Digital I/O Pins : 14 (of which 6 provide PWM output)
– PWM Digital I/O Pins : 6
– Analog Input Pins : 6
– DC Current per I/O Pin : 20 mA
– DC Current for 3.3V Pin 50 mA
– Flash Memory : 32 KB (ATmega328P) of which 0.5 KB used by bootloader
– SRAM : 2 KB (ATmega328P)
– EEPROM : 1KB (ATmega328P)
– Clock Speed : 16 MHz
– Length : 68.6 mm
– Width : 53.4 mmSKU: ARD01Rp160.000Rp175.000 - Programmer Modul
UNO R3 SMD CH340 ATMEGA328P PLUS KABEL USB DAN PIN HEADER
0 out of 5(0)Spesifikasi :
– Microcontroller : ATmega328 SMD
– Operating Voltage : 5V
– Input Voltage (recommended) : 7-12V
– Digital I/O Pins : 14 (of which 6 provide PWM output)
– Analog Input Pins : 6
– Flash Memory : 32 KB (ATmega328) of which 0.5 KB used by bootloader
– SRAM : 2 KB (ATmega328)
– EEPROM : 1 KB (ATmega328)
– Clock Speed : 16 MHzSKU: ARD02Rp79.000Rp85.000