Tidak ada produk di keranjang.
-11%
Cable & Connector
KABEL JUMPER DUPONT 10CM 10 BUAH FEMALE – FEMALE
Panjang kabel = 10 cm
Jenis kabel :
F-F = Female to Female
Harga diatas per 10helai kabel
Pakage = 10 x kabel jumper
Rp4.900 Rp5.500
Kabel jumper female to female Jumper Wire Cable 1P-1P Arduino 10cm dupont
Panjang kabel = 10 cm
Jenis kabel :
F-F = Female to Female
Harga diatas per 10helai kabel
Pakage = 10 x kabel jumper
#dupont #kabel #arduino #jumper #female #male #malefemale #follow #follower #bandung #dupon
| Berat | 5 g |
|---|
Produk Terkait
- Programmer Modul
W5500 ETHERNET NETWORK MODULE HARDWARE TCP / IP 51 / STM32
Description:
The W5500 module is a module based on Ethernet WIZNET new type of chip W5500, module integrates the whole hardware TCP/IP protocol stack, no need code implements the TCP/IP protocol stack, support transmission rate of 10/100MBPS, support sleep mode and wake on LAN ,Within the integrated 32K TX/RX cache,support 8 independent ports run at the same time,Module supports 3.3V or 5V power supply, convenient for the user to use in the SCM system different, module and MCU system communication mode is SPI protocol,Support SPI clock frequencies up to 80M, provide STM32 and 51 SCM client, server, three modes of UDP routines.SKU: ARD07 - Programmer Modul
NANO V3 ATMEGA168 CH340 COMPATIBLE FOR ARDUINO NANO V3.0
It has similar structure with Arduino Diecimila/Duemilanove, but different size. To reduce the size, components are mounted on both sides of the PCB.
The board uses a chip CH340G as converter UART-USB. Chip CH340G – is a budget solution. With an operation frequency in 12Mhz, yields stable result of a data interchange (for correct installation of drivers on the computer follow the instruction). Nano V3, can be powered via microUSB-port (up to 500mA). External power supply 6-12V unregulated to output VIN, or 5V external power source to a regulate output of 5V. The power supply is automatically selected with the maximum voltage value.
* This Nano ATmega168 have PinOut for V3, not V2.Technical details:
Nano V3 form-factor,
ATmega168 (16Mhz) microcontroller,
CH340G – USB-UART interface,
Input voltage 6-12V,
Output voltage 5V/800mA, 3.3V/180mA (Only in NEW vesrion),
MicroUSB – connection socket,
500mA resetable Fuse on USB portSKU: ARD04 - Programmer Modul
CH341A 24 25 SERIES EEPROM FLASH BIOS USB PROGRAMMER
Spesifikasi:
USB EEPROM/MCU Programmer
Support 24EEPROM and 25 SPI flash 8pin/16pin chip
Support USB to TTL with CH341A chip
Recognize 25 series chip automatically
And support download STC series procedure of singlechip
With 24/25 status indicator lamp
SPI pin to support expanding the utility
Provide 5V-3.3V power supply output
Dimension:70mm x 27mm
100% brand new and high qualityKelengkapan:
1 Unit CH341A USB DOWNLOADER for EEPROM 24/25 Series
1 pcs PCB dan header untuk SMD IC 8 dan 16 pinSKU: ARD09
