Tidak ada produk di keranjang.
-20%
IOT & ESP8266
D1 MINI V1 – MINI NODEMCU 4M BYTES LUA WIFI IOT
Spesifikasi:
– 11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire supported(except D0)
– 1 analog input(3.3V max input)
– a Micro USB connection
– Compatible withArduino
– Compatible with nodemcu
– Auto Reset
– Header belum di solder
Kelengkapan:
1x WeMos D1 mini
2x Long female pins
2x Short female pins
2x Normal pins
Rp52.000 Rp65.000
The D1 mini is a mini wifi board based on ESP-8266. ESP-12E
Spesifikasi:
– 11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire supported(except D0)
– 1 analog input(3.3V max input)
– a Micro USB connection
– Compatible withArduino
– Compatible with nodemcu
– Auto Reset
– Header belum di solder
Kelengkapan:
1x WeMos D1 mini
2x Long female pins
2x Short female pins
2x Normal pins
#arduino #wemos #wemosd1 #iot #wifi #esp8266 #komponenelektronik #Rob #DisplayLcd #Arduino #Nodemcu #Eletr #Lcd #Esp01 #Esp32 #Esp8266 #Protoboard #WemosD1
| Berat | 8 g |
|---|
Produk Terkait
- Sensor & Transducer
HC-SR501 PIR MOTION SENSOR MODULE
Description:
100% brand new T6 LED Adjustable Focus Torch
Qty: 1pcs
Product Type: HC–SR501 Body Sensor Module
Operating voltage range: DC 5-20V
Quiescent Current: 50uA
Level output: High 3.3 V /Low 0V
Trigger: L can not be repeated trigger/H can be repeated trigger (Default repeated trigger)
Delay time: 5-200S(adjustable) the range is (0.xx second to tens of second)
Block time: 2.5S(default)Can be made a range(0.xx to tens of seconds
Board Dimensions: 32mm*24mm
Angle Sensor: 100 cone angle
Operation Temp: -15-+70 degrees
Lens size sensor: Diameter:23mm(Default)
Weight: Approx 10g
Easy and Convenient to useSKU: SNSR05 - Programmer Modul
W5500 ETHERNET NETWORK MODULE HARDWARE TCP / IP 51 / STM32
Description:
The W5500 module is a module based on Ethernet WIZNET new type of chip W5500, module integrates the whole hardware TCP/IP protocol stack, no need code implements the TCP/IP protocol stack, support transmission rate of 10/100MBPS, support sleep mode and wake on LAN ,Within the integrated 32K TX/RX cache,support 8 independent ports run at the same time,Module supports 3.3V or 5V power supply, convenient for the user to use in the SCM system different, module and MCU system communication mode is SPI protocol,Support SPI clock frequencies up to 80M, provide STM32 and 51 SCM client, server, three modes of UDP routines.SKU: ARD07 - Programmer Modul
Nano v3 atmega328-pu 5V Compatible with Arduino Board
Spesifikasi:
– Size 43mm x 18mm
– Fully Compatible for Arduino for Nano V3.0 ATmega328P-AU
– ATmega328P-AU Microcontroller
– Operating Voltage 5V
– Input Voltage (recommended) 7V-12V
– Digital I/O Pins 14 (of which 6 provide PWM output)
– Analog Input Pins 8
– Flash Memory 32 KB (ATmega328) of which 2 KB used by bootloader
– Frekuensi clock 16 MHzSKU: ARD54 - Programmer Modul
ARDUINO MEGA 2560 R3 BOARD COMPATIBLE + USB CABLE
Spesifikasi:
– Microcontroller ATmegaOperating Voltage 5V
– Input Voltage (recommended) 7-12V
– Input Voltage (limits) 6-20V
– Digital I/O Pins 54 (of which 15 provide PWM output)
– Analog Input Pins 16
– Flash Memory 256 KB of which 8 KB used by bootloader
– SRAM 8 KB
– EEPROM4 KB
– Clock 16 MHzPembeli akan mendapat 1 buah Arduino Mega dan 1 USB Kabel untuk komunikasi serial dan download program.
SKU: ARD03
