Tidak ada produk di keranjang.
-10%
Sensor & Transducer
ADXL335 GY-61 3WAY AXIS ACCELERATION GRAVITY ANGLE SENSOR MODULE
Using the chip: ADXL335
Power supply :3-5v
Analog X, Y, Z three-axis output
Direct output angle code
Rp45.000 Rp50.000
Name: ADXL335 module (triaxial accelerometer analog output)
Model: GY-61
Using the chip: ADXL335
Power supply :3-5v
Analog X, Y, Z three-axis output
Direct output angle code
#ADXL335 #sensor #bandung #arduino #gravity #accelerome
| Berat | 5 g |
|---|
Produk Terkait
- Relay & Driver Motor
Motor Driver L298N Board Modul Arduino
Detail Produk:
++ Double H bridge drive
++ Chip: L298N (ST NEW)
++ Logical voltage: 5V
++ Drive voltage: 5V-35V
++ Logical current: 0mA-36mA
++ Drive current: 2A(MAX single bridge)
++ Max power: 25W
++ Size:43 x 43 x 26mm
++ Net weight: 26g
++ Package weight:36gSKU: MOT03 - GSM & GPS
SIM800L GPRS GSM MODULE MICROSIM CARD CORE BOARD QUAD-BAND TTL SERIAL
Fitur:
– Quad-band 850/900/1800/1900MHz
– Terhubung dengan jaringan GSM global menggunakan 2G SIM (Telkomsel, Indosat, Three)
– Voice call dengan external 8 speaker dan electret microphone.
– Kirim dan terima SMS.
– Kirim dan terima GPRS data (TCP/IP, HTTP, etc.)
– GPIO ports, misalnya untuk buzzer dan vibrational motor.
– AT command interface dengan deteksi “auto baud”.SKU: GSM02 - Programmer Modul
ARDUINO MEGA 2560 R3 BOARD COMPATIBLE + USB CABLE
Spesifikasi:
– Microcontroller ATmegaOperating Voltage 5V
– Input Voltage (recommended) 7-12V
– Input Voltage (limits) 6-20V
– Digital I/O Pins 54 (of which 15 provide PWM output)
– Analog Input Pins 16
– Flash Memory 256 KB of which 8 KB used by bootloader
– SRAM 8 KB
– EEPROM4 KB
– Clock 16 MHzPembeli akan mendapat 1 buah Arduino Mega dan 1 USB Kabel untuk komunikasi serial dan download program.
SKU: ARD03 - IOT & ESP8266
NODEMCU ESP8266 CP2102 WIFI IOT LUA
Secara umum :
– Based ESP8266 Serial WiFi SoC dengan onboard USB to TTL menggunakan IC CP2102 (USB to UART Bridge Virtual COM Port)
– Bisa diprogram langsung lewat USB.
– Development Board dengan Open-Source Firmware ini dapat dipergunakan untuk mendevelop aplikasi IoT hanya dengan beberapa baris Lua script.
– Wireless standard : IEEE 802.11b/g/n
– 6 x Digital I/O, 3 x PWM Channels, 1 x ADC Channel
– Full I/O control through WiFi network
– GPIO with 15mA current drive capability
– Supports Smart Link intelligent networking
– Built in 32-bit MCU
– built-in TCP/IP protocol stack, and support multiple TCP Client connection
– UART/GPIO data communication interfaceSKU: n/a
