Tidak ada produk di keranjang.
nfc
Menampilkan semua 5 hasil
- Programmer Modul
NTAG215 NFC FORUM TYPE 2 TAG ISO/IEC SMART CARD 14443 A NFC CARDS TAG
Spesifikasi :
Product specifications
Cards size : 85.6*54*0.8mm
Cards Material : PVCElectronic specifications
Chip Type : NTAG215
Protocol : ISO/IEC 14443 A
Operating frequency : 13.56 MHz
NFC Forum Type : NFC Forum Type 2 Tag
Lockable : YES
Reading distance : 0-10cm
Memory : 540 Bytes
Usable Memory : 504 Bytes
Write endurance : > 100000 cycles
Data Retention : > 10 Years
Quality : 100% testEnvironment
Operating temperature : -25 °C to 70 °C
Storage temperature : -55 °C to 125 °CIsi Paket :
1x NTAG215 NFC FORUM TYPE 2 TAG ISO/IEC SMART CARD 14443 A NFC CARDS TAGSKU: NFC06 - Programmer Modul
PN532 NFC PRECISE RFID IC CARD READER MODULE 13.56MHZ FOR RASPBERRY PI
Characteristics
The longest effective communication distance is 5 cm
Support SPI, IIC, UART interface switching.
Can be used for 13.56M contactless communication
Compatible with ISO14443 TYPE A and Class B standardsspecification
chip NXP PN532
Operating Voltage 3.3V
voltage 3.3 to 5.5V
Maximum supply current 150 mAh
Working current (standby mode) 100 mAh
Working current (write mode) 120 mAh
Working current (read mode) 120 mAh
pointer PWR
interface Raspberry Pi’s 20pins interface standard SPI interface,There are two slide switches on the board to select the interface mode:
SET0 SET1
UART L L
SPI L H
IIC H LIsi Paket
1x PN532 NFC PRECISE RFID IC CARD READER MODULE 13.56MHZ FOR RASPBERRY PISKU: NFC04 - Programmer Modul
NFC TAG STICKER 13.56MHZ ISO14443A NTAG 213 NFC STICKERS
Spesifikasi:
– Chip: Ntag213
– Physical capacity: 180 bytes
– Usable capacity: 144 bytes
– Protocol: ISO14443A
– Working frequency: 13.56 MHZ
– Reading and writing distance: 1 to 5 cm
– Reading and writing time: 1 to 2 ms
– Working temperature: -20 to 55 degree, humidity of 90%
– Erase times : > 100000 times
– Data storage: > 10 years
– Reading time: 100000 times
– Diameter: 27mm
– Packaging materials: PE self-adhesive + coated paperKelengkapan:
– 1x NFC TAG STICKER 13.56MHZ ISO14443A NTAG 213 NFC STICKERSSKU: NFC03 - Programmer Modul
13.56 MHZ MIFARE MFRC-522 RC522 RFID READER WRITER ARDUINO
Tinggal solder sedikit dan download library, sudah bisa bereksperimen.
Salah satu library bisa di download di https://github•com/miguelbalboa/rfidSpesifikasi:
Operating current :13-26mA/DC 3.3V
Idle current :10-13mA/DC 3.3V
Sleep current: 80uA
Peak current: 30mA
Operating Frequency: 13.56MHz
Supported card types: mifare1 S50, mifare1 S70 MIFARE Ultralight, mifare Pro, MIFARE DESFire
Product physical characteristics: size: 40mm60mm
Environmental Operating temperature: -20-80 degrees Celsius
Environmental Storage Temperature: -40-85 degrees Celsius
Relative humidity: relative humidity 5% -95%
Module interfaces SPI Parameter:
Data transfer rate: maximum 10Mbit/sSKU: NFC02 - Programmer Modul
PN532 NFC RFID MODULE V3 ARDUINO
Spesifikasi:
– Small dimension
– Support I2C, SPI and HSU (High Speed UART)
– Support RFID reading and writing, P2P communication with peers, NFC with Android phone
– RFID reader/writer supports (Mifare 1k, 4k, Ultralight, and DesFire cards, ISO/IEC 14443-4 cards such as CD97BX, CD light, Desfire, P5CN072)
– Up to 5cm~7cm reading distance
– On-board level shifter, Standard 5V TTL for I2C and UART, 3.3V TTL SPI
– Arduino compatibleIsi Paket:
– 1Unit PN532 NFC RFID Module
– 1pc 2.54mm spacing 4pin Cable
– 1pc Mifare One S50 White Card
– 1pc Mifare One S50 Key Card
– 4pcs Jumper Cable M-MSKU: NFC01
