iot
Menampilkan semua 9 hasil
- IOT & ESP8266
ESP32 ESP-32 ESP-32S DEVELOPMENT BOARD WIFI BLUETOOTH IOT
Features:
=================================
– High performance-price ratio;
– Small volume,easily embeded to other products;
– Strong function with support LWIP protocol,Freertos;
– Suppporting three modes: AP, STA, and AP+STA;
– Supporting Lua program, easily to develop.Spesifikasi:
=================================
– Operating voltage : 3.3V
– Input voltage : 7-12V (Vin)
– Digital IO Pin (DIO) : 25
– Analog Input Pin (ADC) : 6
– Analog Output Pin (DAC) : 2
– UART : 3
– SPI : 2
– I2C : 3
– Flash Memory 4 MB
– SRAM : 520 KB
– Clock Speed : 240 Mhz
– Wi Fi : IEEE 802.11 b/g/n/e/i
– Mode supported : AP, STA, AP+STA
– CP2102 USB ccontrollerAplikasi:
=================================
– IOT
– Smart lighting
– Wireless sensor networks
– Home automation
– Tele medicine
– Telemetri
– WiFi / Bluetooth Audio player
– WiFi camera
– MP3 decoding
– WiFi range extenderSKU: IOT11 - Programmer Modul
RASPBERRY PI CAMERA MODULE REV 1.3
Specification:
Sensor: Omnivision OV5647
Pixels Size: 5MP
Diagonal angle : 65 degree
Resolution: 2592 1944 still picture
Video Recording Support: 1080p30, 720p60 and 640x480p60/90
Compatibility: Raspberry Pi Standard Camera / CSI Port
Cable length: FFC 14 cm approxPackage Iist:
– 1 x Raspberry Pi Camera v1.3
– 1 x 14 cm FFC Flexible CableSKU: RAS03 - GSM & GPS
SIMCOM SIM800L V2.0 QUAD BAND GPRS GSM SMS MODULE 5V TTL ARDUINO PNP
Spesifikasi:
– TTL serial interface compatible with 3.3V and 5V Microcontrollers, compatible with arduino.
– This SIM800L module has a set of TTL level serial interface, a set of power supply interface.
– Besides, there are a set of antenna interface on this module.
– Network support: Quad-Band 850 / 900/ 1800 / 1900 MHz, it can transmit Voice, SMS and data information with low power
– VDD TTL UART interface The TTL UART serial interface, you can connect the MCU like 51MCU or ARM or MSP430 directly. The pin of VDD is used to match voltage of the TTL.
– Model: SIMCOM SIM800L
– Zunixe
– Work voltage: 3.7V to 5V
– Size: 40mm x 28mm x 3mm
– GPRS multi-slot class 12/10
– GPRS mobile station class B
– Compliant to GSM phase 2/2+
– Class 4 (2 W @ 850/900MHz)
– Class 1 (1 W @ 1800/1900MHz)Note : Imei produk ini belum didaftarkan, imei harus didaftarkan dulu di kemenperin atau bea cukai. tutorialnya bisa dicari di youtube.
Kelengkapan:
1 set SIM800L GSM/GPRS Module sudah termasuk dengan antenna externalnya dan kabel coaxial dengan panjang sekitar 10cmSKU: GSM07 - Programmer Modul
SIM900A V4.0 KIT WIRELESS EXTENSION MODULE GSM GPRS
Fitur:
– Power supply oleh 5V , dapat didukung oleh USB , untuk penggunaan jangka panjang lebih baik menggunakan power supply 1A tersendiri dengan konektor XH2.54-2P .
– TTL 5V dan 3V3 ( pin kuning ditandai on board) , yang kompatibel dengan Arduino , STM32 , raspberry pi , dll
– Onboard RS232 yang memudahkan untuk debugging . Di sebelah kiri , pin putih .
– Pada papan ada LED sinyal di kiri – atas sudut IC SIM900A.
On Board ulang dan restart pin , pada bagian bawah SIM900A IC .
– Meiiliki konektor Mini IPX , tetapi belum disolder .
– Standar konektor antena SMA .
– Serial port dilindungi oleh TVS untuk mencegah lonjakan arus atau HV .
– Sirkuit SIM memiliki elektrostatika SMF05C melepaskan IC .
– Paket termasuk antena dan DC jack.
– Ukuran Module : 49mm x 47mmNote : Imei produk ini belum didaftarkan, imei harus didaftarkan dulu di kemenperin atau bea cukai. tutorialnya bisa dicari di youtube.
SKU: NFC05 - Programmer Modul
Arduino Uno R3 CH340 SMD Compatible
Spesifikasi
Microcontroller: ATmega328
Operating Voltage: 5V
Input Voltage (recommended): 7-12V
Input Voltage (limits): 6-20V
Digital I/O Pins: 14 (of which 6 provide PWM output)
Analog Input Pins: 6
DC Current per I/O Pin: 40 mA
DC Current for 3.3V Pin: 50 mA
Flash Memory: 32 KB (ATmega328) of which 0.5 KB used by bootloader
SRAM: 2 KB (ATmega328)
EEPROM: 1 KB (ATmega328)
Clock Speed: 16 MHzSKU: ARD26 - IOT & ESP8266
D1 MINI V1 – MINI NODEMCU 4M BYTES LUA WIFI IOT
Spesifikasi:
– 11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire supported(except D0)
– 1 analog input(3.3V max input)
– a Micro USB connection
– Compatible withArduino
– Compatible with nodemcu
– Auto Reset
– Header belum di solderKelengkapan:
1x WeMos D1 mini
2x Long female pins
2x Short female pins
2x Normal pinsSKU: IOT05 - Programmer Modul
ESP01 PROGRAMMER ADAPTER UART GPIO0 ESP-01
Product Description
This moduel is an USB adpater /
programmer for ESP8266 moduels of type ESP-01.
It is conveniently fitted with a 2x4P
2.54mm female header to plug the ESP01
(according to illustration picture 2)
and configure or run it right away.
A large 1000F cap will help getting a steady 5.0V VCC
from the USb bus and and jumper (on the right of the 2x4P header)
will help configuring the GPIO0 line according needs.
The module is based on the USB-UART bridget CH340
from WCH which is compatible with all platforms.SKU: ARD55 - Programmer Modul
W5500 ETHERNET NETWORK MODULE HARDWARE TCP / IP 51 / STM32
Description:
The W5500 module is a module based on Ethernet WIZNET new type of chip W5500, module integrates the whole hardware TCP/IP protocol stack, no need code implements the TCP/IP protocol stack, support transmission rate of 10/100MBPS, support sleep mode and wake on LAN ,Within the integrated 32K TX/RX cache,support 8 independent ports run at the same time,Module supports 3.3V or 5V power supply, convenient for the user to use in the SCM system different, module and MCU system communication mode is SPI protocol,Support SPI clock frequencies up to 80M, provide STM32 and 51 SCM client, server, three modes of UDP routines.SKU: ARD07