Battery
Menampilkan semua 6 hasil
- Programmer Modul
MICRO USB 5V 1A 18650 TP4056 LITHIUM BATTERY CHARGER MODULE CHARGING
1. Charge module- Linear charging.
2. Current- 1A adjustable.
3. Charge precision- 1.5%.
4. Input voltage- 4.5V-5.5V.
5. Full charge voltage- 4.2V.
6. Led indicator- red is charging Green is full charged.
7. Input interface- micro USB.
8. Work temperature- -10 to +85.
9. Inversed polarity- NO.
10.Size- small about 26mm x 17mmWith MICRO USB female socket can be connect with mobile phone charger directly for charging lithium battery.
Input Voltage5V, Cut-off charging voltage 4.2V +/- 1%
Maximum charging current 1000mA
Battery over-discharge protection voltage 2.5V
Battery over-discharge protection current 3ANOTE:
1. Ampere meter can only be connected to 5v input end of the module.
2. It is better that the charging current is 37% of the battery capacity. If you charge to the battery of 1000mAH, current of 400 is enough.
3. The connection wire should not be too thick.
4. Make sure the connect point is good.
5. If the input voltage is too high, like 5.2v, the current will be less than 1000mA, it is normal. It is protection function, auto-substract the charging current to avoid burn damage to chip.
6. NO Reveral polarity.SKU: ARD25 - Programmer Modul
TP4056 1A 5V CAS BATTERY CHARGING BOARD CHARGER MODULE BATERE MINI USB
Spesifikasi:
Charging method : Linear charge
Charging current : 1A (Adjustable, must change the Resistance)
Charging precision : 1.5%
Input voltage : DC 4.5V-5.5V
Full charge voltage : 4.2V
Charging indicator : Red Charging, Blue Full Charge
Input interface : Mini USB
Operating Temperature : -10 C to +85 C
Dimensions : 25mm x 19mmAdjust Current (Ganti nilai resistornya):
30k -> 50mA
20k -> 70mA
10k -> 130mA
5k -> 250mA
4k -> 300mA
3k -> 400mA
2k -> 580mA
1.66k -> 690mA
1.5k -> 780mA
1.33k -> 900mA
1.2k -> 1000mA (Default)Harap dalam pemasangan battery ke module jangan sampai terbalik karena akan mengakibatkan chipnya rusak.
SKU: ARD21 - Programmer Modul
MICRO USB 5V 1A 18650 TP4056 LITHIUM BATTERY CHARGER MODULE CHARGING
With MICRO USB female socket can be connect with mobile phone charger directly for charging lithium battery.
Input Voltage5V, Cut-off charging voltage 4.2V +/- 1%
Maximum charging current 1000mA
Battery over-discharge protection voltage 2.5V
Battery over-discharge protection current 3ANOTE:
1. Ampere meter can only be connected to 5v input end of the module.
2. It is better that the charging current is 37% of the battery capacity. If you charge to the battery of 1000mAH, current of 400 is enough.
3. The connection wire should not be too thick.
4. Make sure the connect point is good.
5. If the input voltage is too high, like 5.2v, the current will be less than 1000mA, it is normal. It is protection function, auto-substract the charging current to avoid burn damage to chip.
6. NO Reveral polarity.SKU: ARD19