Tidak ada produk di keranjang.
Sensor & Transducer
Menampilkan 1–20 dari 31 hasil
- Sensor & Transducer
VOLTAGE SENSOR MODULE SENSOR TEGANGAN FOR ARDUINO
Modul ini bekerja berdasarkan prinsip resistive divider, membuat tegangan yang akan dideteksi berkurang 5x lipat. Tegangan input analog pada Arduino 0-5v, sehingga tegangan maximum yang dapat dideteksi oleh sensor adalah 5x 5v = 25v. Jika menggunakan sistem tegangan 3.3v, maka tegangan maximum yang dapat dideteksi adalah sebesar 5x 3.3v = 16.5v.
AVR Chip pada Arduino memiliki AD 10-bit, jadi modul ini memiliki ketelitian 0.00489v (5v/1023). Sehingga nilai tegangan minimum yang dapat dideteksi adalah 5x 0.00489v = 0.02445v (bukan 0v)
Modul ini juga dilengkapi dengan terminal baut sehingga pemasangan kabel menjadi lebih mudah dan aman.
**Spesifikasi:
Tegangan input: 0-25v DC
Tegangan deteksi: 0.02445-25v DC
Ketelitian pengukuran: 0.00489v
Ukuran: 25x13mm**Pemasangan input tegangan yg akan dideteksi:
Terminal VCC ke positif
Terminal GND ke negatif**Pemasangan pin ke Arduino:
S (signal) ke Pin AD
+ (positif) ke +5/3.3v
– (negatif) ke -GNDSKU: SNSR32 - Sensor & Transducer
TTP223B MODULE DIGITAL TOUCH SENSOR
Detail Produk:
++ Modes: sentakan (jog), kunci otomatis (self-locking),setelah disentuh, akan kembali ke low power mode dalam 12 detik.
++ Waktu Respon (low power mode): max 220ms
++ Waktu Respon (touch mode) : max 60ms
++ Tegangan Kerja: 2.5-5.5V (konsumsi daya rendah)
++ Jarak Penetrasi: sekitar 5mm (non-logam)
++ Ukuran : 24 x 24 x 7.2mm
++ Ukuran permukaan sentuh : 1.4 x 1.4cm
++ Compatible with all types of single chipIsi Paket :
1x Digital Touch Sensor TTP223B Module Capacitive SwitchSKU: SNSR31 - Sensor & Transducer
TEC1-12705 THERMOELECTRIC COOLER PELTIER
Dimensions: 40 * 40 * 3.8mm element 127
Wire Size: 10 + 5mm RV lead long standard single-head 5mm tinned wire
Internal resistance: 2.4 ~ 2.7 Ohm (ambient temperature 23 + 1C, 1kHZ Ac test)
Maximum temperature: Tmax (Qc = 0) 61C above.
Working current: Imax = 5 (rated voltage startup)
Rated voltage: DC12V
Refrigeration power: Qcmax 45W
Assembly pressure: 85N / cm2
Working environment: temperature range -55C ~ 83C (high ambient temperature will directly affect the cooling efficiency)SKU: SNSR30 - Sensor & Transducer
Reed Sensor Modul Sensor Magnetic
Features:
Sensor Module
Apply to switchboard, duplicator, washing machine, refrigerator, camera, disinfector, electronic scale, juice level gauge, gas meter and water meter, etc
Specifications:
With fixed bolt hole for easy installation
Working distance: 1.5 M
Operating voltage: 3.3 V-5 V
Output Type: Digital switching output (0 and 1)
Size: 3.2 x 1.9 x 0.7 cm
Net weight:4 g
Color:As shown in the pictures
Package Content:
1 x Sensor ModuleSKU: SNSR22 - Sensor & Transducer
DHT11 MODUL SENSOR KELEMBABAN SUHU HUMIDITY TEMPERATURE ARDUINO
Product Description
1 sensor DHT11
2 Humidity measuring range: 20% -95% (0 degrees -> 50 degrees) Humidity measurement error: + -5%
3 Temperature measurement range: 0 degrees -> 50 degrees temperature measurement error: + -2 degrees
4 Operating voltage 3.3V-5V
5 Output Type Digital Output
6 with fixed bolt hole for easy installation
7 small plates PCB size: 3.2cm* 1.4cmTwo module interface specification (3-wire)
1 VCC external 3.3V-5V
External GND 2 GND
3 DO small plate switch digital output interface connected microcontroller IO portSKU: SNSR15 - Sensor & Transducer
DHT11 DIGITAL TEMPERATURE AND HUMIDITY SENSOR
DHT11 termasuk sensor yang memiliki kualitas terbaik, dinilai dari respon, pembacaan data yang cepat, dan kemampuan anti-interference. Ukurannya yang kecil, dan dengan transmisi sinyal hingga 20 meter, membuat produk ini cocok digunakan untuk banyak aplikasi-aplikasi pengukuran suhu dan kelembaban.
Low cost
3 to 5V power and I/O
2.5mA max current use during conversion (while requesting data)
Good for 20-80% humidity readings with 5% accuracy
Good for 0-50C temperature readings 2C accuracy
No more than 1 Hz sampling rate (once every second)
Body size 15.5mm x 12mm x 5.5mm
4 pins with 0.1″ spacingSKU: SNSR09 - Sensor & Transducer
Water Flow Sensor YF-S201 range 1-30 Liter/menit Arduino
Spek:
External threads: 1/2″
temperature : -25~+80 C
Allowing pressure: pressure 1.75Mpa
Operating humidity range: 35%~90%RH (no frost)
Load capacity: 10 mA (DC 5V)
Working voltage range: DC 5~18 V
Maximum operating current: 15 mA (DC 5V)
The lowest rated working voltage: DC 4.5 5V-24V
Size : 6cm X 4cm /2.36” X 1.57”
Color : BlackSKU: SNSR33 - Sensor & Transducer
Sensor Warna TCS3200 GY-31 Colour Board Module for Arduino
Spesifikasi:
– Power supply 3-5v
– Tahan dari interferensi cahaya
– LED dapat dikendalikan (nyala atau mati)
– Dapat mendeteksi warna obyek dalam kondisi kurang cahaya
– Jarak baca optimum 1 cmIsi Paket :
1x Sensor Warna TCS3200 GY-31 Colour Board Module for ArduinoSKU: SNSR29 - Sensor & Transducer
SENSOR WATER LEVEL KETINGGIAN PERMUKAAN AIR CURAH HUJAN RAIN VOLUME
Contoh aplikasi:
1. Alarm banjir, dapat dijadikan alarm jika ketinggian permukaan air telah melebihi nilai yang ditentukan.
2. Mengukur intensitas curah hujan berdasarkan ketinggian air dalam bejana ukur penampung air hujan.
3. Membuat perbandingan campuran kimia yang pas dalam bejana laboratorium.Spesifikasi:
Tegangan kerja: 3-5 VDC
Arus kerja: < 20mA
Tipe sensor: analog
Max output: 2.5v (saat sensor terendam semua)
Luas area deteksi: 16x40mm
Suhu kerja: 10-30 C
Ukuran: 20x62x8 mmSKU: SNSR26 - Sensor & Transducer
SENSOR CAHAYA BH1750 LUX METER SENSOR INTENSITAS CAHAYA GY-302
Spesifikasi:
Model: GY-302
Chip: BH1750FVI
Power supply : 3V – 5V
I2C Interface
No external parts required
Tokoduino dot com
Dimensions: 13,9mm x 18,5mm
Spectral responsibility is approximately human eye response
Illuminance to Digital Converter
Wide range and High resolution. (1 – 65535 lux)
Low Current by power down function
50Hz / 60Hz Light noise reject-function
Light source dependency is little. (ex. Incandescent Lamp. Fluorescent Lamp. Halogen Lamp. White LED. Sun Light)
It is possible to select 2 type of I2C slave-address.
Adjustable measurement result for influence of optical window (It is possible to detect min. 0.11 lx, max. 100000 lx by using this function. )
Small measurement variation (+/- 20%)
The influence of infrared is very small.Kelengkapan:
1pcs GY-302 Module
Header male 5 kakiSKU: SNSR24 - Sensor & Transducer
SENSOR API IR INFRARED DETECTION SENSOR MODULE
Tersedia lubang baut untuk mempermudah penempatan.
Jadi outputnya berupa digital output 0 atau 1 yang berasal dari comparator LM393.Specifications:
Spectrum range: 760nm ~ 1100nm
Detection angle: 0 – 60 degree
Power: 3.3V ~ 5.3V
Mounting hole dia.: 3.1mm / 0.11in
PCB size: 4.7 * 1.5cm / 1.8 * 0.6in
Weight: 2g / 0.07oz
Package size: 8.0 * 6.0 * 1.0cm / 3.2 * 2.4 * 0.3in
Package weight: 2g / 0.07oz
SKU: SNSR23 - Sensor & Transducer
MLX90614 SENSOR INFARED TEMPERATURE
Spesifikasi
– Factory calibrated
– 40 to +85C for ambient sensor temperature
– 70 to +380C for object temperature
– I2C digital interface
– Customizable PWM output for continuous reading
– Akurasi pengukuran 0.5C
– Resolusi pengukuran 0.02C
– 4.5V~5V power supplyPembeli mendapatkan:
– 1 unit sensor GY-906 IR temperatur sensor
– 1 set pin header malePaket :
1x MLX90614 SENSOR INFARED TEMPERATURESKU: SNSR20 - Sensor & Transducer
IR INFRARED SPEED KECEPATAN SENSOR PHOTO OPTO INTERRUPTOR 4 PIN LM393
Spesifikasi :
– Tegangan kerja : 3.3V~5V
– Lebar celah : 5mm
– Output : sinyal digital, normally LOW
– Berat : 4gram
– Dimensi : 37mm x 15mm x 13mmPinout :
VCC: + power
GND: – power
DO: Digital Output
AO: Not usedPaket : 1x IR INFRARED SPEED KECEPATAN SENSOR PHOTO OPTO INTERRUPTOR 4 PIN LM393 MODULE
SKU: SNSR18 - Sensor & Transducer
Infrared IR Receiver TL1838 Universal IR receiver Red Infra VS1838B HX1838 PC638 TL1838 1838 38Khz
-25%
Sensor & TransducerInfrared IR Receiver TL1838 Universal IR receiver Red Infra VS1838B HX1838 PC638 TL1838 1838 38Khz
VS1838B includes high-speed high-sensitivity PIN photodiode and a low-power, high-gain Preamplifier IC, using epoxy plastic package design, the product has passed REACH and SGS certified as environmentally friendly products, as in the infrared remote control system receiver Uses. There is a commonly used IR receiver, you can use it with the Infrared Remote Control build you remote control project. It is easy to use and low cost. It mates well with embedded electronics and can be used with common IR remotes.
Features:
Working Voltage :2.7V to 5.5V
Reception Distance : 23M
Reception Angle : 35 Degree
Low Level Voltage : 0.4V
High Level Voltage : 4.5V
Material : Plastic, Alloy
Color : Black, Silver Tone
Carrier frequence: 38KHzIsi Paket:
1x 5mm Infrared IR Receiver TL1838SKU: SNSR17 - Sensor & Transducer
DS18B20 TEMPERATURE SENSOR STAINLESS STEEL WATERPROOF PROBE DS 18B20
Spesifikasi:
1. Brand New High Quality.
2.The probe the temperature sensor DS18B20 original chip.
3. High quality stainless steel tube encapsulation waterproof moistureproof prevent rust.
4. Stainless steel shell 6*50mm.
5. Power supply range: 3.0V to 5.5V.
6. Operating temperature range: -55C to +125C (-67F to +257F)
7. Storage temperature range: -55C to +125C (-67F to +257F)
8. Accuracy over the range of -10C to +85C: 0.5C. tduino
9. No other components, unique single bus interface.
10. Output lead: Red (VCC), Yellow or Blue (DATA), Black (GND).
11. Cable length: 100 cm.SKU: SNSR16 - Sensor & Transducer
DETEKSI HUJAN (RAINDROP) SENSOR MODULE RAINWATER FOLIAR
Penjelasan produk:
1. Sensor memakai material FR-04 berkualitas tinggi dua sisi, ukuran luas 5cm x 4cm dengan permukaan dilapis nikel, anti oksidasi dan daya tahan superior
2. Output comparator bersih dengan sinyal bagus lebih dari 15mA
3. Sensitivitas bisa diatur dengan potensiometer
4. Tegangan kerja 3.3V – 5V
5. Output: digital (0 dan 1) dan analog (tegangan)
6. Dilengkapi lobang baut untuk instalasi
7. Ukuran PCB 3.2cm x 1.4cm
8. Menggunakan pembanding LM393 comparator yang stabilInterface:
1. VCC positif 3-5V
2. GND ground
3. DO Digital output (0 dan 1)
4. AO Analog outputInstruksi:
1. Sambungkan ke power supply 5V, lalu lampu indikator menyala. Ketika tidak ada tetesan / rintik hujan, output digital bernilai tinggi, lampu deteksi mati. Ketika terdeteksi tetesan air hujan, output digital mengeluarkan nilai rendah dan lampu deteksi menyala.
2. Ketika tetesan air hujan menghilang, nilai output kembali tinggi.
3. Output analog (AO) dapat dihubungkan dengan microcontroller (AD) untuk mendeteksi intensitas rintik air hujan.
4. OUtput digital (DO) dapat dihubungkan dengan microcontroller untuk mendeteksi adanya hujan.SKU: SNSR14
